Digital PH EC TDS TEMP Meter Tester Temperature Pen Water Purity PPM Filter Hydroponic for Aquarium Pool Water Monitor

Product Descriptions:

Display: LCD Digital

Accuracy: 0.01

Resolution: 0.01

Operating Temperature: 0~60°C

Measuring Range: 0.00~14.00

Probe Type: Precision glass bulb electrode

Power Supply:2*1.5V LR44 Batteries(Not included!!!)

Calibration solution: 4.01PH and 6.86PH (not included 9.18PH)

Operation:

1.Remove protective cap.

2.First rinse the electrode with distilled water and suck it with filter paper.

3.Turn the meter on by pressing “ON/OFF” key.

4.Immerse the pH meter electrode in the solution to be tested (should not be over the immersion line).

5.Stir gently and wait around 30 seconds till the reading stabilizes.

6.After finishing, clear the electrode with pure water, turn the meter off by pressing “ON/OFF” key.

7.Always replace the protective cap after use.

Calibration

1.Turn on PH meter

2.Disolve each buffer solution in 250ML of distilled water

3.Immerse the electrode into the PH 6.86 solution,(under the temperature of 25)

4.Press the “CAL”(calibration)button for 5 seconds and release

-Display will start flashing 6.86

-Wait until the display stops flashing.

Rinse the electrode with distilled water and dry it with filter paper.

1. Immerse the electrode in PH 4.00 solution,

-Press“CAL”button for 5 seconds, then press and release immediately second time

-Reading will start flashing 4.00

-Wait until display stops flashing

Rinse and dry the electrode with distilled water as before.

6.Place the meter back to the buffer solution to test calibration. If incorrect, please repeat the calibration

7.If approximate PH of your test solution is known to be above 7.0,calibrate the meter using 6.86 and 9.18 solution. To do this, please follow the calibration chart, The third step is the calibration method for 9.18 point.

Features

1.The AquaLutio Digital TDS Water Meter is ideal for testing applications such as hydroponics and gardening, pools and spas, aquariums and reef tanks, water ionizers, Water Filter. drinking water and more.

2.Measurement Range: 0-9990 ppm , 1 ppm Resolution, +/- 2% Readout Accuracy.

3.Temperature Button: Test water temperature, 31 – 200 F degrees, +/- 2% Readout Accuracy.

4.Function: saves measurements for convenient reading and recording.

5.Auto-off function – Turns off meter after 10 minutes of non-use to conserve batteries.

6.The smallest and lightest TDS meter available on the market.Highly Efficient and Accurate Due to Its Advanced Microprocessor Technology. (Color Very)

7.Power source: 2 x 1.5 V(LR44 Button Cell)(not included)

Packaging details

1 x TDS meter

Feature:

Material: plastic

Can test purity of the water quality at any time.

Waterproof design, lower power procesor.

Accurate testing the purity of the water quality at home.

Simple to use, just single click, you can know the quality of water, convenient to use at home

Lock Function: Manually lock measurements for convenient reading and recording

Auto-off Function: Auto-off after 5 mins without any operation to conserve batteries.

Note:

Measurement Range: 0-9999ppm (display 3 numbers, above 999PPM display*10)

Temperature Range: 0-80° C

Battery: 2 x LR44 1.5V button cell( No included )

Package Content:

1 x TDS meter

1 x English Manual